Summary
The FAA adopts a new airworthiness directive (AD) for certain Cirrus Design Corporation (CDC) Models SR20 and SR22 airplanes. This AD requires you to check the maintenance records to determine whether the brake caliper piston O-ring seals were replaced at the last annual or 100-hour inspection. If the O-rings were not replaced, this AD requires you to replace the O-ring seals with new seals or replace brake calipers. This AD also requires you to modify the main landing gear wheel fairings to add temperature indicator sticker inspection holes, trim the wheel fairings to prevent them from holding fluids, install temperature indicator stickers on the brake calipers, and insert Revision A6 (with revised preflight walk-around, a limitation on the engine speed used to taxi, and brake inspection/servicing intervals) into the Pilot's Operating Handbook (POH). This AD results from several reports of airplanes experiencing brake fires and two airplanes losing directional control. We are issuing this AD to detect, correct, and prevent overheating damage to the brake caliper piston O-ring seals, which could result in leakage of brake hydraulic fluid. Consequently, this could lead to the loss of braking with loss of airplane directional control or brake fire.
Directive Details
AD Number
FAA-2006-24010
Document Number
E6-16741
Type
Rule
Publication Date
October 13, 2006
Effective Date
November 17, 2006
Affected Manufacturer
Cirrus Design Corporation Models SR20 and SR22
Criticality
important
Emergency
No
Docket ID
Docket No. FAA-2006-24010
Topics
Official Documents
Automated AD compliance tracking
AeroCopilot matches ADs to your aircraft and tracks compliance status. Included in every plan from $9.99 monthly.
Unlock AD-to-aircraft matching, compliance tracking, recurrence schedule with a free AeroCopilot account.
Sign up free to unlock AD-to-aircraft matching, compliance tracking, recurrence scheduleFree forever · No credit card · Sourced directly from FAA & NOAA pipelines