Summary
The FAA is adopting a new airworthiness directive (AD) for certain Honeywell COM units and transponders, installed on but not limited to certain transport category airplanes. This AD requires a revision to the Normal Procedures section of the airplane flight manual to advise the flightcrew to check the status of the transponder after changing the air traffic control (ATC) code. This AD also requires replacing certain identification plate(s) with new plate(s), testing certain COM units or transponders as applicable, and corrective action if necessary. For certain airplanes, this AD requires replacing the transponders of certain COM units with new or modified transponders. For certain other airplanes, this AD requires installing a modification into certain transponders. This AD results from the transponder erroneously going into standby mode if the flightcrew takes longer than five seconds when using the rotary knob of the radio management unit to change the ATC code. We are issuing this AD to prevent the transponder of the COM unit from going into standby mode, which could increase the workload on the flightcrew and result in improper functioning of the traffic alert and collision avoidance system.
Directive Details
AD Number
FAA-2006-24639
Document Number
E6-14940
Type
Rule
Publication Date
September 12, 2006
Effective Date
October 17, 2006
Affected Manufacturer
Honeywell RCZ-833J/K, -851J/K, and -854J Communication (COM) Units, Equipped with XS-852E/F Mode S Transponders
Criticality
routine
Emergency
No
Docket ID
Docket No. FAA-2006-24639
Topics
Official Documents
Automated AD compliance tracking
AeroCopilot matches ADs to your aircraft and tracks compliance status. Included in every plan from $9.99 monthly.
Unlock AD-to-aircraft matching, compliance tracking, recurrence schedule with a free AeroCopilot account.
Sign up free to unlock AD-to-aircraft matching, compliance tracking, recurrence scheduleFree forever · No credit card · Sourced directly from FAA & NOAA pipelines