AD FAA-2007-29062

We are adopting a new airworthiness directive (AD) for all Boeing Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. For certain airplanes, this AD requires replacing the outboard stabilizing fitting and certain adjacent components of the main landing gear (MLG) support beam. This AD also requires repetitive inspections for discrepancies of the outboard stabilizing fitting, walking beam hanger, and rear spar attachment, and corrective actions if necessary. For certain airplanes, this AD provides an alternative one-time inspection of the outboard stabilizing fitting for discrepancies, and corrective actions if necessary, which would extend the compliance time for the replacement of the outboard stabilizing fitting. For certain other airplanes, this AD also requires performing a torque check of the aft pin of the outboard stabilizing fitting, and corrective actions if necessary. This AD results from reports of findings of fatigue cracking of the outboard stabilizing fitting and stress corrosion cracking of the bolts attaching the fitting to the wing rear spar. We are issuing this AD to detect and correct that cracking, which could result in disconnection of the MLG actuator from the rear spar and support beam, consequent damage to the hydraulic system, and possible loss of the "A" and "B" hydraulic systems and damage or jamming of the flight control cables. Damage or jamming of the flight control cables could result in loss of control of the airplane.