AD FAA-2008-1116

We are adopting a new airworthiness directive (AD) for certain Boeing Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. For certain airplanes, this AD requires deactivating or modifying the wiring to the outboard landing lights, until the wire bundles and electrical connectors have been replaced. For all airplanes, this AD also requires inspecting for any broken, damaged, or missing fairleads, grommets, and wires in the four electrical junction boxes of the main wheel well, and corrective actions if necessary. For certain airplanes, this AD also requires replacing certain wire bundles for the landing lights and fuel shutoff valves, and related investigative, other specified, and corrective actions if necessary. For certain airplanes, this AD also requires replacing of certain electrical connectors and backshell clamps. This AD results from reports of uncommanded engine shutdowns and burned and damaged wire bundles associated with the outboard landing lights and engine fuel shutoff valves. This AD also results from reports of damaged and missing grommets and broken and damaged fairleads in the electrical junction boxes of the main wheel well. We are issuing this AD to prevent a hot short between the outboard landing light and fuel shutoff valve circuits, which could result in an uncommanded engine shutdown. We are also issuing this AD to prevent corrosion of the electrical connectors of the wing rear spars, which could result in short circuits and consequent incorrect functioning of airplane systems needed for safe flight and landing.