AD FAA-2010-0553

We are adopting a new airworthiness directive (AD) for certain Model DC-10-30, DC-10-30F, DC-10-30F (KC-10A and KDC-10), DC-10-40, DC- 10-40F, and MD-10-30F airplanes. This AD requires doing a one-time inspection of the wire bundles to determine if wires touch the upper surface of the center upper auxiliary fuel tank, and marking the location if necessary; a one-time inspection for splices and damage of all wire bundles routed above the center upper auxiliary fuel tank; a one-time inspection for damage to the fuel vapor barrier seal and upper surface of the center upper auxiliary fuel tank; and corrective actions, if necessary. This AD also requires installing non-metallic barrier/shield sleeving to the wire harnesses, new clamps, new attaching hardware, and new extruded channels. This AD was prompted by fuel system reviews conducted by the manufacturer. We are issuing this AD to reduce the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane.