AD FAA-2010-0679

We are superseding an existing airworthiness directive (AD) for the products listed above. That AD currently requires repetitive inspections and torque checks of the hanger fittings and strut forward bulkhead of the forward engine mount and adjacent support structure, and visual inspections of the internal angle and external bulkhead chord and detailed inspection of internal angles, and corrective actions if necessary. The existing AD also provides for an optional inspection. This new AD requires additional inspections of airplanes that have hi-lok bolts and collars at all of the Group B fastener locations, except fastener 13, and related investigative and corrective actions. This AD also requires repetitive inspections of the internal angle, and corrective actions if necessary. This AD also requires, for certain airplanes, replacing the fasteners, which terminates certain repetitive inspections. This AD was prompted by reports of undertorqued or loose fasteners, a cracked bulkhead chord, and a fractured back-up angle. We are issuing this AD to detect and correct loose fasteners and/or damaged or cracked hanger fittings, back-up angles, and bulkhead of the forward engine mount, which could lead to failure of the hanger fitting and bulkhead and consequent separation of the engine from the airplane.