AD FAA-2011-0998

We are adopting a new airworthiness directive (AD) for certain Airbus Model A319-111, -112, and -132 airplanes; Model A320-111, -211, -212, -214 and -232 airplanes; and Model A321-111, -211, -212, and -231 airplanes. This AD was prompted by reports that corrosion was found on the overwing refueling aperture on the top wing skin, and that for certain airplanes, repairs made using primer coating may prevent proper electrical bonding provision between the overwing refueling cap adaptor and the wing skin. This AD requires performing an electrical bonding test between the gravity fill re-fuel adaptor and the top skin panels on the left-hand and right-hand wings, and if necessary performing a general visual inspection for corrosion of the component interface and adjacent area, and repairing the gravity fuel adaptor if any corrosion is found. We are issuing this AD to detect and correct corrosion and improper bonding, which in combination with a lightning strike in this area, could create a source of ignition in a fuel tank, resulting in a fire or explosion, and consequent loss of the airplane.