AD FAA-2014-0451

We are adopting a new airworthiness directive (AD) for all The Boeing Company Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), and MD-88 airplanes. This AD was prompted by reports of cracks emanating from the aft-most barrel nut holes of the left and right upper rear spar caps of the horizontal stabilizer. This AD requires repetitive high frequency eddy current (ETHF) inspections for cracks in the areas around the two aft-most barrel nut holes of the upper rear spar caps, and corrective actions if necessary; and repetitive ETHF inspections for cracks in the areas around the two aft- most barrel nut holes of any repaired or replaced upper rear spar cap, and corrective actions if necessary. We are issuing this AD to detect and correct cracks in the horizontal stabilizer, which could propagate until an upper rear spar cap severs, and result in failure of the horizontal stabilizer upper center or aft skin panel and adversely affect the structural integrity of the airplane.